MEASURING FILM-FORMING AMINES
Recommend Monitoring Methods: REAGENTS | TEST KITS

Filming Amine Test Kits | Reagents

Measuring concentration of polyamines

FINEAMIN, filming amine based products, are industrial water additives which, when fed continuously into the boiler feedwater, protect metal surfaces against corrosion and deposits by forming a thin and homogeneous film inside the system. The filming amine component reacts as a barrier that repels the potentially corrosive dissolved oxygen, carbon dioxide and water carryover.

Regular water analyses to monitor the concentration of filming amines / FINEAMIN in the system are essential for ensuring their uninterrupted presence and protection of the entire water-steam-condensate cycle. This practice also helps in avoiding overdosing.

Typically, the detection of excess polyamines / FINEAMIN in the system is conducted by adding a reactive agent to the water samples that interacts with the amines. The results are then interpreted using a spectrophotometer. In the absence of a spectrophotometer, portable, visual test kits are available.

IMPORTANT: All the available methods for the determination of polyamine concentration mentioned below have been tested with FINEAMIN products.

Fineamin Reagents for Measuring Film Forming Amines
Heyl Test Kit
Hach Reagents
Methyl Orange Test Kit

Polyamine 565

  • LABORATORY ANALYSES

High-sensibility testing reagents that offer the easiest way possible to monitor water treatment and determine the polyamines excess by means of a spectrophotometer.  Contact us for further information about setting up your spectrophotometer for the reagents; calibration curve, and other instructions.

Hach Method

  • LABORATORY ANALYSES

This method is technique sensitive. Hach’s Film Forming Amines kit allows you to test FFA products using Hach’s DR3900 and DR6000 spectrophotometers. It has the highest accuracy at lower concentrations, especially for measurements in high pressure boiler systems (ultrapure water).

Heyl Test Kit

  •  FIELD TESTING

Field Test Kit for the determination of polyamine concentration in circulation water. Water analyses can be carried out anywhere on site. Such a kit is very fast and inexpensive. The accuracy is more qualitative than quantitative, but it is more difficult to interpret the result than in Rose Bengal case.

CHEMets® Test Kit 

  • FIELD TESTING

It uses standard methyl orange chemistry. Analyses can be carried out anywhere on site and can be much easier and faster interpreted than for the Heyl Test Kit. The filming amine compound reacts with methyl orange to form a yellow-colored complex that is extracted into an immiscible organic solvent.

  • Includes: Reagent 1 (500 ml), Reagent 2 (500ml);
  • Measuring time: < 15 minutes;
  • Resolution: ±10 ppb;
  • Manufacturer: CWB Germany.
  • Includes: Reagent 1 (100 ml), Reagent 2 (100ml);
  • Measuring time: < 10 minutes;
  • Resolution: Highest accuracy: ±10 ppb , Range 0.020 mg/L – 3.000 mg/L;
  • Manufacturer: HACH Lange.
  • Includes: Reagent 1, Reagent 2, Reagent 3, Titration;
  • Measuring time: 3 minutes;
  • Resolution: 1 mg/l;
  • Manufacturer: Heyl.
  • Includes: refill, comparator, reaction tube with lid, tip breaking tool;
  • Measuring time: 3 minutes;
  •  Resolution: 1 mg/l;
  • Manufacturer: Aquaphoenix US.
Scroll to Top